TRAIN SMARTER
NOT HARDER

Every movement with step-by-step instructions, the muscles it works, common mistakes and form tips — free, no account needed.

Browse by Muscle Group
Browse by Training Style
Browse by Equipment
0 Exercises
Clear
Standing Y Raise
HomeShoulders › Standing Y Raise

Standing Y Raise

Shoulders Bodyweight Push Calisthenics
Difficulty: Beginner Equipment: Bodyweight Primary: Shoulders Secondary: Traps, Rotator Cuff

Overview

If you are building out shoulders training, the Standing Y Raise is a beginner-level option that uses bodyweight. Mechanically, the target muscles raise and rotate the upper arm — the reason this exercise carries over to overhead capability and shoulder joint stability. What separates this variation from other shoulders work is that it is performed from a standing position — a detail that changes which fibres take the load and how much stability the movement demands. The 'Standing Raise' element in the name is the part that matters technically — it defines the exact position and path this version uses, and swapping it changes the training effect. Support comes from the traps and rotator cuff; the traps in particular help elevate and retract the shoulder blades, which is why fatigue there often shows up before the shoulders is fully worked. Training this with bodyweight needs no equipment at all and can be done virtually anywhere, though it is harder to load progressively once you outgrow it. Programme it alongside your other shoulders work rather than as a standalone. The pattern is accessible enough to learn in a single session, which makes it a sound entry point before progressing to heavier or more complex variations.

Muscles Worked

The Standing Y Raise is primarily a shoulders exercise, but it is never only the shoulders doing the work.

Shoulders
75%
Traps
42%
Rotator Cuff
32%
  • Shoulders (primary) — These fibres raise and rotate the upper arm, and they carry the majority of the load in this movement.
  • Traps (secondary) — Assists by helping to elevate and retract the shoulder blades, contributing to neck and shoulder support.
  • Rotator Cuff (secondary) — Assists by helping to stabilise and rotate the shoulder joint, contributing to shoulder joint integrity.

Benefits of the Standing Y Raise

  • Builds strength in the shoulders through a push pattern, which carries over directly to pressing resistance away from your torso.
  • Reinforces the chest, shoulders and triceps working as a unit as a coordinated unit rather than as isolated parts.
  • Uses bodyweight, which needs no equipment at all and can be done virtually anywhere.
  • Working from a standing position shifts emphasis onto fibres that standard variations under-train.

How to Perform the Standing Y Raise

  1. 1
    Stand tall with your feet about hip-width apart, holding your bodyweight.
  2. 2
    Take a breath and brace, then press your bodyweight away from your body under control.
  3. 3
    Press until your arms are almost straight, stopping just short of locking the elbows.
  4. 4
    Check yourself midway through the Standing Y Raise: your bodyweight should be moving at a steady speed, not accelerating.
  5. 5
    Lower back to the start slowly, feeling the shoulders lengthen under tension.
  6. 6
    Progress by slowing the tempo or changing leverage rather than adding reps forever.
Your Goal General Fitness
Sets
2–3
Reps
10–15
Rest
60s

Breathing Technique

The general rule for the Standing Y Raise is simple: inhale as you lower the resistance toward you, exhale as you press it away. For heavier sets, take a breath in at the start position, brace as though bracing for a punch, and hold that pressure through the hardest part of the rep before exhaling. Getting this right stabilises your trunk and keeps blood pressure in a sensible range.

Tips for Proper Form

  • Re-check a standing position between sets; it tends to creep as you fatigue.
  • Keep the shoulder blades set down and back so the shoulder joint stays in a safe position.
  • Control the lowering phase — most of the shoulders stimulus comes from resisting the weight, not lifting it.
  • Set your position before the first rep rather than correcting it mid-set.
  • Keep the range of motion consistent across every rep so you can compare sessions honestly.
  • Control the lowering phase. Most of the shoulders growth from this movement happens on the way down, not the way up.
  • Expect to feel the Standing Y Raise in your traps and rotator cuff as well as the shoulders — that's normal, but if the traps and rotator cuff fatigue first, revisit your setup.
  • Progress by changing leverage or tempo rather than adding reps forever — a slower rep loads the shoulders more than ten fast ones.

Common Mistakes to Avoid

  • Flaring the elbows straight out to the sides.
    Do this insteadTuck to roughly 45 degrees — it protects the shoulder and keeps the load on the target muscle.
  • Treating the Standing Y Raise as a warm-up movement and never progressing it.
    Do this insteadGive it real working sets — the shoulders needs a genuine stimulus, not a token effort.
  • Rushing reps because there's no weight to slow you down.
    Do this insteadUse a deliberate tempo; without external load, time under tension is your main lever on the shoulders.

Variations by Experience Level

Beginner

Perform the movement slowly with a light load until the pattern feels automatic. Stay at this level until every Standing Y Raise rep looks the same as the first.

Intermediate

Add a one- to two-second pause at the hardest position of each repetition. Alternate harder and easier Standing Y Raise sessions rather than pushing every one.

Advanced

Slow the lowering phase to three or four seconds to accumulate tension without adding weight. At this level the Standing Y Raise is best programmed after your heaviest shoulders work, not before it.

Safety Considerations

  • The most common way the Standing Y Raise goes wrong is shoulder impingement when the elbows flare excessively.
  • Because this is performed from a standing position, confirm the setup is secure and stable before loading it.
  • Stop the set when technique degrades — a Standing Y Raise rep that no longer looks like your first one is not building anything.
  • Warm up with lighter sets of the Standing Y Raise before your first working set.

Who Should Avoid This Exercise

The Standing Y Raise suits most healthy trainees, but it is not appropriate for everyone.

  • Anyone with an unresolved shoulder impingement or rotator cuff issue, since the pressing position loads exactly that structure.
  • Anyone experiencing sharp, localised or radiating pain during the movement — that is a signal to stop, not to push through.

This is general educational information, not medical advice. If you are managing an injury or medical condition, check with a qualified professional before adding this exercise to your programme.

Frequently Asked Questions

What muscles does the Standing Y Raise work?

It primarily trains the shoulders, with the traps and rotator cuff assisting. The pattern is classified as push, so the chest, shoulders and triceps working as a unit share the workload.

Is the Standing Y Raise suitable for beginners?

Yes. It is rated beginner-level, and the pattern can usually be learned in a single session with light resistance.

How many sets and reps should I do?

A practical starting point is 3 sets of 6-8, resting 2-3 min between sets, roughly 2x per week. Adjust from there based on how you recover.

What equipment do I need for the Standing Y Raise?

You need bodyweight. This needs no equipment at all and can be done virtually anywhere, though it is harder to load progressively once you outgrow it.

How do I breathe during the Standing Y Raise?

As a general rule, inhale as you lower the resistance toward you, exhale as you press it away. Avoid holding your breath for the entire set.

What is the most common mistake with the Standing Y Raise?

Shoulder impingement when the elbows flare excessively. The simplest correction is to keep the shoulder blades set down and back so the shoulder joint stays in a safe position.

What can I do instead of the Standing Y Raise?

Good substitutes that train the same shoulders pattern include Barbell Incline Shoulders Press, Barbell Seated Overhead Press, and Cable 30 Degree Shrug. Pick whichever matches the equipment you have available.

Why perform this from a standing position?

Changing the angle changes which fibres of the shoulders take the most tension, so it complements rather than duplicates your other shoulders work.

About Training Your Shoulders

The Standing Y Raise fits into that picture as a beginner option using bodyweight, leaning on the traps and rotator cuff alongside the shoulders.

The shoulders, or deltoids, cap the upper arm and are made up of three distinct heads: the anterior (front) deltoid, the lateral (side) deltoid, and the posterior (rear) deltoid. Each head pulls the arm in a different direction, so building round, capped, three-dimensional shoulders requires training all three rather than relying on pressing alone. Well-developed shoulders create the width that makes the waist look smaller and the upper body look athletic.

Overhead pressing — with a barbell, dumbbells, or in the Arnold press variation — is the primary mass builder, heavily recruiting the front delts along with the triceps and upper chest. However, the front delts also receive a great deal of work from all chest pressing, so most lifters already have well-developed fronts and underdeveloped sides and rears. That imbalance is why lateral raises, which isolate the side delt and directly widen the shoulders, are one of the most valuable exercises in any physique routine. Rear-delt work such as face pulls and reverse flyes corrects posture and completes the rounded look.

The deltoids are made up of fibres that respond well to higher volume and frequency. Pressing can be trained in moderate ranges around 6 to 10 reps, while lateral and rear-delt isolation thrives in higher ranges of 12 to 20 with controlled tempo, since these movements are about tension and consistency rather than heavy load. Training shoulders two or three times per week, with an emphasis on the side and rear heads, produces the most balanced development.

The shoulder is the most mobile and least stable joint in the body, which makes technique and warm-up especially important. Avoid pressing behind the neck, control the weight on raises rather than swinging it up with momentum, and do not chase heavy dumbbells on lateral raises at the expense of form — leading with the elbows and stopping at shoulder height keeps tension on the delt and the strain off the joint. Including rear-delt and rotator-cuff work helps keep the shoulder healthy for years of training.

Strong, balanced shoulders improve your pressing strength, protect against common gym injuries, and dramatically improve the look of the upper body. Prioritise all three heads using the popular shoulder exercises below.

Popular Shoulders exercises:
Add to workout