TRAIN SMARTER
NOT HARDER

Every movement with step-by-step instructions, the muscles it works, common mistakes and form tips — free, no account needed.

Browse by Muscle Group
Browse by Training Style
Browse by Equipment
0 Exercises
Clear
Bench Triceps Dip Straight Legs
HomeTriceps › Bench Triceps Dip Straight Legs

Bench Triceps Dip Straight Legs

Triceps Bench Push Strength
Difficulty: Beginner Equipment: Bench Primary: Triceps Secondary: Chest, Shoulders

Overview

Classified as a push pattern, the Bench Triceps Dip Straight Legs loads the triceps through bench. The working muscles straighten the elbow, which is what makes this movement valuable for lockout strength on every press. What separates this variation from other triceps work is that it is performed from a bench-supported position — a detail that changes which fibres take the load and how much stability the movement demands. Note the 'Dip Straight Legs' component of the name: it specifies how this variation differs from otherwise similar triceps movements. Support comes from the chest and shoulders; the chest in particular help bring the upper arm across and in front of the body, which is why fatigue there often shows up before the triceps is fully worked. Training this with bench provides a stable platform and defines the range of motion, though it can restrict shoulder blade movement if set too flat. Programme it alongside your other triceps work rather than as a standalone. The pattern is accessible enough to learn in a single session, which makes it a sound entry point before progressing to heavier or more complex variations.

Muscles Worked

The Bench Triceps Dip Straight Legs is primarily a triceps exercise, but it is never only the triceps doing the work.

Triceps
75%
Chest
42%
Shoulders
32%
  • Triceps (primary) — These fibres straighten the elbow, and they carry the majority of the load in this movement.
  • Chest (secondary) — Assists by helping to bring the upper arm across and in front of the body, contributing to pressing strength and upper-body pushing power.
  • Shoulders (secondary) — Assists by helping to raise and rotate the upper arm, contributing to overhead capability and shoulder joint stability.

Benefits of the Bench Triceps Dip Straight Legs

  • Reinforces the chest, shoulders and triceps working as a unit as a coordinated unit rather than as isolated parts.
  • Allows progressive overload — adding load or repetitions over weeks is what actually drives triceps growth.
  • Builds strength in the triceps through a push pattern, which carries over directly to pressing resistance away from your torso.
  • Uses bench, which provides a stable platform and defines the range of motion.
  • Working from a bench-supported position shifts emphasis onto fibres that standard variations under-train.

How to Perform the Bench Triceps Dip Straight Legs

  1. 1
    Lie back with your shoulder blades set and your feet flat, holding the bench.
  2. 2
    Take a breath and brace, then press the bench away from your body under control.
  3. 3
    Press until your arms are almost straight, stopping just short of locking the elbows.
  4. 4
    A good Bench Triceps Dip Straight Legs rep looks identical to the one before it; when it doesn't, the set is done.
  5. 5
    Lower back to the start slowly, feeling the triceps lengthen under tension.
  6. 6
    Keep every rep at the same tempo — when speed drops noticeably, end the set.
Your Goal General Fitness
Sets
2–3
Reps
10–15
Rest
60s

Breathing Technique

The general rule for the Bench Triceps Dip Straight Legs is simple: inhale as you lower the resistance toward you, exhale as you press it away. For heavier sets, take a breath in at the start position, brace as though bracing for a punch, and hold that pressure through the hardest part of the rep before exhaling. Consistent breathing is what keeps your brace intact from the first rep to the last.

Tips for Proper Form

  • Keep the shoulder blades set down and back so the shoulder joint stays in a safe position.
  • Re-check a bench-supported position between sets; it tends to creep as you fatigue.
  • Set your position before the first rep rather than correcting it mid-set.
  • Keep the range of motion consistent across every rep so you can compare sessions honestly.
  • Control the lowering phase — most of the triceps stimulus comes from resisting the weight, not lifting it.
  • Keep your elbows at roughly 45 degrees from your torso — flaring them wide shifts stress to the shoulder joint.
  • A useful check on the Bench Triceps Dip Straight Legs: if you can't pause for a full second at the hardest point of the rep, the difficulty is beyond what the triceps can currently control.
  • Set up the bench the same way every session so you can actually compare one week to the next.

Common Mistakes to Avoid

  • Losing the shoulder blade position partway through the set.
    Do this insteadReset your setup between reps if you have to — a drifting base costs you both power and safety.
  • Treating the Bench Triceps Dip Straight Legs as a warm-up movement and never progressing it.
    Do this insteadGive it real working sets — the triceps needs a genuine stimulus, not a token effort.
  • Letting the chest take over from the triceps.
    Do this insteadReset your position and reduce the difficulty until you feel it in the right place.

Variations by Experience Level

Beginner

Perform the movement slowly with a light load until the pattern feels automatic. If bench feels unmanageable, rehearse the same pattern with bodyweight first. Stay at this level until every Bench Triceps Dip Straight Legs rep looks the same as the first.

Intermediate

Add load in small increments while holding the same tempo and range you established. Track your Bench Triceps Dip Straight Legs numbers so you can see whether the triceps is actually progressing.

Advanced

Progress to a heavier variation of the same pattern once technique is stable at your current load. Use the Bench Triceps Dip Straight Legs as your accessory once your main triceps lift is done for the day.

Safety Considerations

  • Because this is performed from a bench-supported position, confirm the setup is secure and stable before loading it.
  • The most common way the Bench Triceps Dip Straight Legs goes wrong is shoulder impingement when the elbows flare excessively.
  • Warm up with lighter sets of the Bench Triceps Dip Straight Legs before your first working set.
  • Stop the set when technique degrades — a Bench Triceps Dip Straight Legs rep that no longer looks like your first one is not building anything.

Who Should Avoid This Exercise

The Bench Triceps Dip Straight Legs suits most healthy trainees, but it is not appropriate for everyone.

  • Anyone with active elbow tendinopathy, since repeated loaded flexion or extension tends to aggravate it.
  • Anyone with an unresolved shoulder impingement or rotator cuff issue, since the pressing position loads exactly that structure.
  • Anyone experiencing sharp, localised or radiating pain during the movement — that is a signal to stop, not to push through.

This is general educational information, not medical advice. If you are managing an injury or medical condition, check with a qualified professional before adding this exercise to your programme.

Frequently Asked Questions

What muscles does the Bench Triceps Dip Straight Legs work?

It primarily trains the triceps, with the chest and shoulders assisting. The pattern is classified as push, so the chest, shoulders and triceps working as a unit share the workload.

Is the Bench Triceps Dip Straight Legs suitable for beginners?

Yes. It is rated beginner-level, and the pattern can usually be learned in a single session with light resistance.

How many sets and reps should I do?

A practical starting point is 3 sets of 6-8, resting 2-3 min between sets, roughly 2x per week. Adjust from there based on how you recover.

What equipment do I need for the Bench Triceps Dip Straight Legs?

You need bench. This provides a stable platform and defines the range of motion, though it can restrict shoulder blade movement if set too flat.

How do I breathe during the Bench Triceps Dip Straight Legs?

As a general rule, inhale as you lower the resistance toward you, exhale as you press it away. Avoid holding your breath for the entire set.

What is the most common mistake with the Bench Triceps Dip Straight Legs?

Shoulder impingement when the elbows flare excessively. The simplest correction is to keep the shoulder blades set down and back so the shoulder joint stays in a safe position.

What can I do instead of the Bench Triceps Dip Straight Legs?

Good substitutes that train the same triceps pattern include Cable Triceps Push Down Straight Bar, Triceps Light Stretch, and Band Skullcrusher. Pick whichever matches the equipment you have available.

Why perform this from a bench-supported position?

Changing the angle changes which fibres of the triceps take the most tension, so it complements rather than duplicates your other triceps work.

About Training Your Triceps

The Bench Triceps Dip Straight Legs fits into that picture as a beginner option using bench, leaning on the chest and shoulders alongside the triceps.

The triceps brachii makes up roughly two-thirds of the size of your upper arm, which means that if your goal is bigger arms, the triceps deserve more attention than the biceps. As the name suggests, it has three heads — the long, lateral, and medial heads — and its primary job is to extend the elbow, straightening the arm. The long head also crosses the shoulder joint, so it is involved in pulling the arm down and back.

Because the three heads have slightly different functions, varied exercise selection produces the most complete development. Heavy compound pressing such as the close-grip bench press and dips trains all three heads under significant load and builds raw size and strength. Pushdowns with a rope or bar isolate the lateral head, which gives the arm its width when viewed from the side. Overhead extensions — where the arm is raised above the head — place the long head on a deep stretch and are essential for filling out the back of the arm and creating the horseshoe shape.

Triceps respond well to a mix of rep ranges. The heavy presses can be trained in the 6 to 10 range, while cable and overhead isolation work is best in the 10 to 15 range with strict form. Like the biceps, the triceps recover quickly and tolerate being trained a couple of times per week, especially when some of that volume comes from your pressing work for chest and shoulders.

A frequent error is letting the elbows drift and flare on extensions and pushdowns, which turns the movement into a shoulder and chest exercise. Keep the upper arms relatively fixed so that only the forearm moves, and lock out each rep fully to maximise the contraction at the medial head. On dips and close-grip presses, keep the elbows tucked rather than flared to protect the shoulders and bias the triceps.

Developing the triceps not only adds the majority of your arm size but also directly increases your pressing strength on the bench and overhead press. A balanced arm routine gives the triceps at least as much attention as the biceps. Build yours around the popular triceps exercises listed below.

Popular Triceps exercises:
Add to workout