TRAIN SMARTER
NOT HARDER

Every movement with step-by-step instructions, the muscles it works, common mistakes and form tips — free, no account needed.

Browse by Muscle Group
Browse by Training Style
Browse by Equipment
0 Exercises
Clear
Barbell Lying Triceps Skull Crushers
HomeTriceps › Barbell Lying Triceps Skull Crushers

Barbell Lying Triceps Skull Crushers

Triceps Barbell Push Strength
Difficulty: Beginner Equipment: Barbell Primary: Triceps Secondary: Anconeus, Forearms

Overview

Rated beginner, the Barbell Lying Triceps Skull Crushers develops the triceps through a push pattern loaded by barbell. The muscular job here is to straighten the elbow, and that translates directly into lockout strength on every press. What separates this variation from other triceps work is that it is performed from a lying position — a detail that changes which fibres take the load and how much stability the movement demands. Note the 'Lying Skull Crushers' component of the name: it specifies how this variation differs from otherwise similar triceps movements. Support comes from the anconeus and forearms; the anconeus in particular help contribute to the movement, which is why fatigue there often shows up before the triceps is fully worked. Training this with barbell lets you load heavier than almost any other tool and progress in small increments, though it requires a rack or spotter once the weight gets serious. Programme it alongside your other triceps work rather than as a standalone. The pattern is accessible enough to learn in a single session, which makes it a sound entry point before progressing to heavier or more complex variations.

Muscles Worked

The Barbell Lying Triceps Skull Crushers is primarily a triceps exercise, but it is never only the triceps doing the work.

Triceps
75%
Anconeus
42%
Forearms
32%
  • Triceps (primary) — These fibres straighten the elbow, and they carry the majority of the load in this movement.
  • Anconeus (secondary) — Assists by helping to contribute to the movement, contributing to overall performance in this pattern.
  • Forearms (secondary) — Assists by helping to control the wrist and maintain grip, contributing to grip endurance and carryover to every pulling lift.

Benefits of the Barbell Lying Triceps Skull Crushers

  • Builds strength in the triceps through a push pattern, which carries over directly to pressing resistance away from your torso.
  • Working from a lying position shifts emphasis onto fibres that standard variations under-train.
  • Allows progressive overload — adding load or repetitions over weeks is what actually drives triceps growth.
  • Uses barbell, which lets you load heavier than almost any other tool and progress in small increments.
  • Reinforces the chest, shoulders and triceps working as a unit as a coordinated unit rather than as isolated parts.

How to Perform the Barbell Lying Triceps Skull Crushers

  1. 1
    Lie back with your shoulder blades set and your feet flat, holding the barbell.
  2. 2
    Take a breath and brace, then press the barbell away from your body under control.
  3. 3
    Press until your arms are almost straight, stopping just short of locking the elbows.
  4. 4
    If the Barbell Lying Triceps Skull Crushers starts to feel like it's working everywhere except the triceps, reset your position before continuing.
  5. 5
    Lower back to the start slowly, feeling the triceps lengthen under tension.
  6. 6
    Keep every rep at the same tempo — when speed drops noticeably, end the set.
Your Goal General Fitness
Sets
2–3
Reps
10–15
Rest
60s

Breathing Technique

The general rule for the Barbell Lying Triceps Skull Crushers is simple: inhale as you lower the resistance toward you, exhale as you press it away. For heavier sets, take a breath in at the start position, brace as though bracing for a punch, and hold that pressure through the hardest part of the rep before exhaling. Getting this right stabilises your trunk and keeps blood pressure in a sensible range.

Tips for Proper Form

  • Grip hard — a firm grip measurably increases how much force the working muscles can produce.
  • Keep the shoulder blades set down and back so the shoulder joint stays in a safe position.
  • Re-check a lying position between sets; it tends to creep as you fatigue.
  • Keep the range of motion consistent across every rep so you can compare sessions honestly.
  • Set your position before the first rep rather than correcting it mid-set.
  • Control the lowering phase — most of the triceps stimulus comes from resisting the weight, not lifting it.
  • Set your shoulder blades down and back before the first rep — a stable base is what lets the triceps actually take the load.
  • Expect to feel the Barbell Lying Triceps Skull Crushers in your anconeus and forearms as well as the triceps — that's normal, but if the anconeus and forearms fatigue first, revisit your setup.
  • Add weight to the barbell only once you can complete every rep at the same tempo. Speed loss is your signal to hold the load.

Common Mistakes to Avoid

  • Flaring the elbows straight out to the sides.
    Do this insteadTuck to roughly 45 degrees — it protects the shoulder and keeps the load on the target muscle.
  • Copying someone else's Barbell Lying Triceps Skull Crushers setup without adjusting for your own build.
    Do this insteadLimb lengths change what a good position looks like; adjust until you feel it in the triceps.
  • Setting up slightly differently every set.
    Do this insteadMark your grip and stance so the triceps gets loaded the same way each time.

Variations by Experience Level

Beginner

Shorten the range of motion to the portion you can control, then extend it as confidence builds. If barbell feels unmanageable, rehearse the same pattern with bodyweight first. Stay at this level until every Barbell Lying Triceps Skull Crushers rep looks the same as the first.

Intermediate

Increase total working sets before increasing load — volume drives most of the adaptation at this stage. Track your Barbell Lying Triceps Skull Crushers numbers so you can see whether the triceps is actually progressing.

Advanced

Slow the lowering phase to three or four seconds to accumulate tension without adding weight. Use the Barbell Lying Triceps Skull Crushers as your accessory once your main triceps lift is done for the day.

Safety Considerations

  • Warm up with lighter sets of the Barbell Lying Triceps Skull Crushers before your first working set.
  • Use safety pins or a spotter when training near your limit.
  • The most common way the Barbell Lying Triceps Skull Crushers goes wrong is shoulder impingement when the elbows flare excessively.
  • Because this is performed from a lying position, confirm the setup is secure and stable before loading it.
  • Stop the set when technique degrades — a Barbell Lying Triceps Skull Crushers rep that no longer looks like your first one is not building anything.

Who Should Avoid This Exercise

The Barbell Lying Triceps Skull Crushers suits most healthy trainees, but it is not appropriate for everyone.

  • Anyone experiencing sharp, localised or radiating pain during the movement — that is a signal to stop, not to push through.
  • Anyone with active elbow tendinopathy, since repeated loaded flexion or extension tends to aggravate it.
  • Anyone with an unresolved shoulder impingement or rotator cuff issue, since the pressing position loads exactly that structure.

This is general educational information, not medical advice. If you are managing an injury or medical condition, check with a qualified professional before adding this exercise to your programme.

Frequently Asked Questions

What muscles does the Barbell Lying Triceps Skull Crushers work?

It primarily trains the triceps, with the anconeus and forearms assisting. The pattern is classified as push, so the chest, shoulders and triceps working as a unit share the workload.

Is the Barbell Lying Triceps Skull Crushers suitable for beginners?

Yes. It is rated beginner-level, and the pattern can usually be learned in a single session with light resistance.

How many sets and reps should I do?

A practical starting point is 3 sets of 6-8, resting 2-3 min between sets, roughly 2x per week. Adjust from there based on how you recover.

What equipment do I need for the Barbell Lying Triceps Skull Crushers?

You need barbell. This lets you load heavier than almost any other tool and progress in small increments, though it requires a rack or spotter once the weight gets serious.

How do I breathe during the Barbell Lying Triceps Skull Crushers?

As a general rule, inhale as you lower the resistance toward you, exhale as you press it away. Avoid holding your breath for the entire set.

What is the most common mistake with the Barbell Lying Triceps Skull Crushers?

Shoulder impingement when the elbows flare excessively. The simplest correction is to keep the shoulder blades set down and back so the shoulder joint stays in a safe position.

What can I do instead of the Barbell Lying Triceps Skull Crushers?

Good substitutes that train the same triceps pattern include Single Arm Overhead Extension Resistance Band, Ez Bar Overhead Extensions Standing, and Overhead Triceps Stretch Side Angle. Pick whichever matches the equipment you have available.

Why perform this from a lying position?

Changing the angle changes which fibres of the triceps take the most tension, so it complements rather than duplicates your other triceps work.

About Training Your Triceps

Where the Barbell Lying Triceps Skull Crushers earns its place is repeatability — barbell makes the setup easy to reproduce, which is what lets you actually progress the triceps.

The triceps brachii makes up roughly two-thirds of the size of your upper arm, which means that if your goal is bigger arms, the triceps deserve more attention than the biceps. As the name suggests, it has three heads — the long, lateral, and medial heads — and its primary job is to extend the elbow, straightening the arm. The long head also crosses the shoulder joint, so it is involved in pulling the arm down and back.

Because the three heads have slightly different functions, varied exercise selection produces the most complete development. Heavy compound pressing such as the close-grip bench press and dips trains all three heads under significant load and builds raw size and strength. Pushdowns with a rope or bar isolate the lateral head, which gives the arm its width when viewed from the side. Overhead extensions — where the arm is raised above the head — place the long head on a deep stretch and are essential for filling out the back of the arm and creating the horseshoe shape.

Triceps respond well to a mix of rep ranges. The heavy presses can be trained in the 6 to 10 range, while cable and overhead isolation work is best in the 10 to 15 range with strict form. Like the biceps, the triceps recover quickly and tolerate being trained a couple of times per week, especially when some of that volume comes from your pressing work for chest and shoulders.

A frequent error is letting the elbows drift and flare on extensions and pushdowns, which turns the movement into a shoulder and chest exercise. Keep the upper arms relatively fixed so that only the forearm moves, and lock out each rep fully to maximise the contraction at the medial head. On dips and close-grip presses, keep the elbows tucked rather than flared to protect the shoulders and bias the triceps.

Developing the triceps not only adds the majority of your arm size but also directly increases your pressing strength on the bench and overhead press. A balanced arm routine gives the triceps at least as much attention as the biceps. Build yours around the popular triceps exercises listed below.

Popular Triceps exercises:
Add to workout