TRAIN SMARTER
NOT HARDER

Every movement with step-by-step instructions, the muscles it works, common mistakes and form tips — free, no account needed.

Browse by Muscle Group
Browse by Training Style
Browse by Equipment
0 Exercises
Clear
Suspension Trainer With Grips Face Pull
HomeShoulders › Suspension Trainer With Grips Face Pull

Suspension Trainer With Grips Face Pull

Shoulders Suspension Trainer Pull Calisthenics
Difficulty: Intermediate Equipment: Suspension Trainer Primary: Shoulders Secondary: Traps, Rotator Cuff

Overview

The Suspension Trainer With Grips Face Pull is a intermediate-level pull movement that trains the shoulders using suspension trainer. Because the primary movers raise and rotate the upper arm, the payoff shows up in overhead capability and shoulder joint stability. It sits in the calisthenics category, so the emphasis falls on movement quality and repeatable output. Note the 'Trainer Grips Face Pull' component of the name: it specifies how this variation differs from otherwise similar shoulders movements. Support comes from the traps and rotator cuff; the traps in particular help elevate and retract the shoulder blades, which is why fatigue there often shows up before the shoulders is fully worked. Training this with suspension trainer lets you dial difficulty precisely by changing body angle, though it requires a secure anchor point. Programme it alongside your other shoulders work rather than as a standalone. It assumes you already own the basic pattern and can maintain position under moderate load.

Muscles Worked

The Suspension Trainer With Grips Face Pull is primarily a shoulders exercise, but it is never only the shoulders doing the work.

Shoulders
75%
Traps
42%
Rotator Cuff
32%
  • Shoulders (primary) — These fibres raise and rotate the upper arm, and they carry the majority of the load in this movement.
  • Traps (secondary) — Assists by helping to elevate and retract the shoulder blades, contributing to neck and shoulder support.
  • Rotator Cuff (secondary) — Assists by helping to stabilise and rotate the shoulder joint, contributing to shoulder joint integrity.

Benefits of the Suspension Trainer With Grips Face Pull

  • Uses suspension trainer, which lets you dial difficulty precisely by changing body angle.
  • Builds strength in the shoulders through a pull pattern, which carries over directly to drawing resistance toward your torso.
  • Reinforces the lats, mid-back, rear delts and biceps as a coordinated unit rather than as isolated parts.

How to Perform the Suspension Trainer With Grips Face Pull

  1. 1
    Take a stable starting position holding your bodyweight.
  2. 2
    Begin by drawing your shoulder blade toward your spine, then pull your bodyweight toward you.
  3. 3
    Pull until your shoulders is fully shortened and hold that position for a beat.
  4. 4
    Through the whole Suspension Trainer With Grips Face Pull, keep the effort in the shoulders — if you lose that connection, stop and reset.
  5. 5
    Return to the start under control, letting the arm straighten without losing tension.
  6. 6
    Breathe out through the effort and keep the shoulders under tension between reps.
Your Goal General Fitness
Sets
2–3
Reps
10–15
Rest
60s

Breathing Technique

The general rule for the Suspension Trainer With Grips Face Pull is simple: inhale on the lowering phase, exhale as you pull. For heavier sets, take a breath in at the start position, brace as though bracing for a punch, and hold that pressure through the hardest part of the rep before exhaling. Consistent breathing is what keeps your brace intact from the first rep to the last.

Tips for Proper Form

  • Lead with the elbow rather than the hand so the back does the work instead of the arms.
  • Control the lowering phase — most of the shoulders stimulus comes from resisting the weight, not lifting it.
  • Set your position before the first rep rather than correcting it mid-set.
  • Keep the range of motion consistent across every rep so you can compare sessions honestly.
  • Start every rep by pulling your shoulder blade toward your spine, then let the arm follow. Leading with the hand makes this a biceps exercise.
  • Expect to feel the Suspension Trainer With Grips Face Pull in your traps and rotator cuff as well as the shoulders — that's normal, but if the traps and rotator cuff fatigue first, revisit your setup.
  • Set up close to your anchor point and test your position before committing bodyweight to it.

Common Mistakes to Avoid

  • Stopping short of full contraction.
    Do this insteadPull all the way to the point where the shoulders is fully shortened and hold for a beat.
  • Copying someone else's Suspension Trainer With Grips Face Pull setup without adjusting for your own build.
    Do this insteadLimb lengths change what a good position looks like; adjust until you feel it in the shoulders.
  • Going too heavy on an unstable surface.
    Do this insteadKeep it light — the instability is the stimulus, and the shoulders can't stabilise a max load.

Variations by Experience Level

Beginner

Reduce the load and perform the Suspension Trainer With Grips Face Pull for higher repetitions, focusing entirely on position rather than weight. If suspension trainer feels unmanageable, rehearse the same pattern with bodyweight first. Stay at this level until every Suspension Trainer With Grips Face Pull rep looks the same as the first.

Intermediate

Increase total working sets before increasing load — volume drives most of the adaptation at this stage. Track your Suspension Trainer With Grips Face Pull numbers so you can see whether the shoulders is actually progressing.

Advanced

Progress to a heavier variation of the same pattern once technique is stable at your current load. Use the Suspension Trainer With Grips Face Pull as your accessory once your main shoulders lift is done for the day.

Safety Considerations

  • Warm up with lighter sets of the Suspension Trainer With Grips Face Pull before your first working set.
  • The most common way the Suspension Trainer With Grips Face Pull goes wrong is using momentum from the lower back to swing the weight.
  • Stop the set when technique degrades — a Suspension Trainer With Grips Face Pull rep that no longer looks like your first one is not building anything.

Who Should Avoid This Exercise

The Suspension Trainer With Grips Face Pull suits most healthy trainees, but it is not appropriate for everyone.

  • Anyone experiencing sharp, localised or radiating pain during the movement — that is a signal to stop, not to push through.
  • Anyone with an unresolved shoulder impingement or rotator cuff issue, since the pressing position loads exactly that structure.

This is general educational information, not medical advice. If you are managing an injury or medical condition, check with a qualified professional before adding this exercise to your programme.

Frequently Asked Questions

What muscles does the Suspension Trainer With Grips Face Pull work?

It primarily trains the shoulders, with the traps and rotator cuff assisting. The pattern is classified as pull, so the lats, mid-back, rear delts and biceps share the workload.

Is the Suspension Trainer With Grips Face Pull suitable for beginners?

It is rated intermediate. You should already be comfortable with basic shoulders work and able to hold position under moderate load before attempting it.

How many sets and reps should I do?

A practical starting point is 4 sets of 4-6, resting 3 min between sets, roughly 2-3x per week. Adjust from there based on how you recover.

What equipment do I need for the Suspension Trainer With Grips Face Pull?

You need suspension trainer. This lets you dial difficulty precisely by changing body angle, though it requires a secure anchor point.

How do I breathe during the Suspension Trainer With Grips Face Pull?

As a general rule, inhale on the lowering phase, exhale as you pull. Avoid holding your breath for the entire set.

What is the most common mistake with the Suspension Trainer With Grips Face Pull?

Using momentum from the lower back to swing the weight. The simplest correction is to lead with the elbow rather than the hand so the back does the work instead of the arms.

What can I do instead of the Suspension Trainer With Grips Face Pull?

Good substitutes that train the same shoulders pattern include Band Warm Up Shoulder Stretch, Front Raises Barbell, and Barbell Standing Close Grip Military Press. Pick whichever matches the equipment you have available.

How often should I do the Suspension Trainer With Grips Face Pull?

About 2-3x per week suits most people. Recovery, not frequency, is what limits progress.

About Training Your Shoulders

Where the Suspension Trainer With Grips Face Pull earns its place is repeatability — suspension trainer makes the setup easy to reproduce, which is what lets you actually progress the shoulders.

The shoulders, or deltoids, cap the upper arm and are made up of three distinct heads: the anterior (front) deltoid, the lateral (side) deltoid, and the posterior (rear) deltoid. Each head pulls the arm in a different direction, so building round, capped, three-dimensional shoulders requires training all three rather than relying on pressing alone. Well-developed shoulders create the width that makes the waist look smaller and the upper body look athletic.

Overhead pressing — with a barbell, dumbbells, or in the Arnold press variation — is the primary mass builder, heavily recruiting the front delts along with the triceps and upper chest. However, the front delts also receive a great deal of work from all chest pressing, so most lifters already have well-developed fronts and underdeveloped sides and rears. That imbalance is why lateral raises, which isolate the side delt and directly widen the shoulders, are one of the most valuable exercises in any physique routine. Rear-delt work such as face pulls and reverse flyes corrects posture and completes the rounded look.

The deltoids are made up of fibres that respond well to higher volume and frequency. Pressing can be trained in moderate ranges around 6 to 10 reps, while lateral and rear-delt isolation thrives in higher ranges of 12 to 20 with controlled tempo, since these movements are about tension and consistency rather than heavy load. Training shoulders two or three times per week, with an emphasis on the side and rear heads, produces the most balanced development.

The shoulder is the most mobile and least stable joint in the body, which makes technique and warm-up especially important. Avoid pressing behind the neck, control the weight on raises rather than swinging it up with momentum, and do not chase heavy dumbbells on lateral raises at the expense of form — leading with the elbows and stopping at shoulder height keeps tension on the delt and the strain off the joint. Including rear-delt and rotator-cuff work helps keep the shoulder healthy for years of training.

Strong, balanced shoulders improve your pressing strength, protect against common gym injuries, and dramatically improve the look of the upper body. Prioritise all three heads using the popular shoulder exercises below.

Popular Shoulders exercises:
Add to workout